Ceiling drywall and finishing in Mount Vernon, NY is the entire focus of Mount Vernon Drywall Co. We work overhead all day, on the plaster ceilings and pre-war apartments that fill this city. A ceiling shows every ridge and shadow the moment daylight rakes across it, so we treat the plane above your head as the hardest surface in the house. From a single cracked bedroom ceiling to a full-floor skim, our crews finish it to disappear.
Mount Vernon is a dense, historic Westchester city packed with older multi-family homes and pre-war apartment buildings, most of them built with plaster-and-lath ceilings that have carried a century of settling and moisture. Those ceilings crack along the lath lines, sag between the keys, and telegraph every seam under a bare bulb. It is exactly the kind of aging overhead work our crews were built around.
Most Mount Vernon ceilings started as plaster over wood lath, and after decades the plaster keys break away from the lath and the whole plane begins to drop. We re-anchor loose plaster to the joists with plaster washers and screws, then skim over the field so the repair reads as one continuous ceiling rather than a patch. Where the plaster is too far gone, we overlay it in 5/8 inch board and finish fresh.
The reason a ceiling is unforgiving is light. A window, a hanging fixture, or afternoon sun crossing the plane at a low angle will find any hump or fastener you left proud. We finish to the light each room actually gets, feathering compound wide and sanding under a raking work lamp so the ceiling stays clean once your own lamps come on.
Overhead sanding is the messiest job in drywall, and in an occupied Mount Vernon apartment that matters. We tent the room in plastic, run HEPA-filtered vacuum sanders, and protect floors and fixtures before the first cut so the dust stays in the room we are working in and leaves with us.
We also finish ceilings in nearby Bronxville. Call Mount Vernon Drywall Co. at (914) 916-1030 for ceiling drywall & fine finishing across Westchester.